Six Points

  • Built-in compressor
    As it has a compressor inside the freezer, there is no need for piping work. Environmentally friendly refrigerant is used. You can set the compressor at a different place too.(piping work will be necessary)
  • Save the electric fee
    and enable efficient operation

    Thanks to ACVSS system, it can save 30% of the electric fee. Its efficiency is much higher than other freezers.
  • French top board size can fit in the 3D freezer
    Basic size of the freezer shelf for tray is aluminum size(600×400), and you can change the size as you want.(8~12 trays, 75~50mm space between the trays)
    530×380, 430×340 and table-sized pan are optional.
  • Reduce the amount of frost as far as possible.
    There will be smaller burden on the freezer. Due to its small amount of frost, the freezer can operate more efficiently.
    ※If you find frost, you can remove on your hands.
  • No need for pre-cooling.
    You can put warm food directly after cooking

    You can use this freezer both for cooling and freezing. Since the 3D cooling air freezes food, covering the whole surface of food, it will not blow off the food and the environment inside the freezer will be kept sanitary.
  • No duct inside the freezer
    Since there is no ducts inside the freezer, there is no room for bacteria to propagate. In addition, it is very easy to wash the freezer in water.

Photo

3D freezer combined with the compressor

KQF-8A-300B

KQF-8A-300B Drawing

KQF-8A-300B Photo

3D freezer combined with the compressor

KQF-16A-300B

KQF-16A-300B Drawing

KQF-16A-300B Photo

3D freezer combined with the compressor

KQF-16B-300BSpecial type

KQF-16B-300B Special type Drawing

KQF-16B-300B Special type Photo

Standard model

Model
The power
of compressor
Power consumption
50/60[Hz/kw]
Weigh
Tray size
Tray pitch
Temperature
inside
the freezer
Power
KQF-8A-300B KQF-16A-300B KQF-16B-300B Special type
3HP(2.2kw) 3HP(2.2kw) 3HP(2.2kw)
2.44 / 2.95 2.58 / 3.10 2.58 / 3.10
230[kg] 320[kg] 320[kg]
600×400[mm]
(French top board)
600×400[mm]
(French top board)
600×400[mm]
(French top board)
Standard 8TrayPitch 75mm
(Smallest 12TrayPitch 50mm)
Standard 16TrayPitch 75mm
(Smallest 24TrayPitch 50mm)
Standard 16TrayPitch 75mm
(Smallest 24TrayPitch 50mm)
-35℃~− 10℃
(You can set the temperature)
−35℃~− 10℃
(You can set the temperature)
−35℃~− 10℃
(You can set the temperature)
3P/200V 3P/200V 3P/200V
※Aluminum trays are optional. Top and bottom doors(one room) Top and bottom doors(one room)
 

Easy operation with 3D control panel.

Easy operation with 3D control panel.

Start
set to storing mode Start・Stop
3D Mode
Start and Stop the 3D Mode
Defros
Start and Stop defrost
Buzzer
The Buzzer rings when the 3D Mode is finished.
You can set it to ON/OFF
3D Timer
Countdown timer when operating the 3D Mode
Thermo Controller
Control the temperature inside the freezer
(You can change the preset temperature)
Fan Speed Control
Fan Speed ControlChange the speed
of fan-motor inside the freezer
slow/medium-speed/fast
Freezer Operating Lamp
The lamp comes on when operating
Freezer Error Lamp
The lamp comes on in case an error occurs
Electromagnetic Valve
Opening / Closing Lamp
When the Electromagnetic valve
opens and closes, the lamps comes on
Mode Change
Change the mode to cooling or freezing
Core temperature Control
Control the temperature using the core
temperature measuring system